Performance

A performance induction kit for the Fiat Punto / Linea and Alfa Romeo MiTo 1.4T. This replaces the OEM restrictive air box.Features 100% hand made in the UK – Guaranteed against manufacturing defects for life Easy to clean using hot soapy water T304 stainless...

Purdue Performance are finally bringing you an R8 Coil Pack with Loom Upgrade for all Abarth TJet Models!Fits:Abarth 500Abarth 595Abarth 695Abarth Grande PuntoCustom made loom which needs to be professionally installed by a qualified Auto Electritian due to the wires needing to be cut...

DESCRIPTION BY SCARA: NEW EXHAUST MANIFOLD MADE OF 310S STAINLESS STEEL WITH SYMMETRICAL HEART-SHAPED TUBES. THIS FORM OF THE MANIFOLD IS DESIGNED TO HAVE THE SAME EXPANSIONS IN ALL THE TUBES. IT IS RESISTANT TO HIGH TEMPERATURES (1040 ° C) UNLIKE THE CLASSIC 304...

THIS IS A BRAND NEW, TIMING BELT KIT WITH TENSIONER AND WATER PUMP TO FIT CERTAIN VARIATIONS OF THE FOLLOWING MODELS: 500 ABARTH 1.4 TURBO GRANDE PUNTO ABARTH 1.4 TURBO PUNTO EVO ABARTH 1.4 TURBO ALFA ROMEO MITO 1.4 16V ALFA ROMEO MITO 1.4 TURBO...

Complete kit and instructions for ease of installationHigh flow intake in carbon fibre housingHand fabricated aluminium pipingMaximises density charge of cold air for increased performance (8bhp)Aesthetically pleasing designThis kit comes with everything you need for the installation. It uses a carbon fibre canister to...

PLEASE NOTE: This Oil Cooler Kit has been designed for use in conjunction with the Forge Motorsport front mount intercooler (FMINT500). It will not fit with the OEM intercooler. Forge Motorsport cannot confirm fitment with any other manufacturers' aftermarket intercooler. The Forge Motorsport oil...

Why buy the Forge Fiat 500 dump valve? Your Fiat 500 is equipped with an electronic solenoid driven valve from the factory, which is integrated into the functions of the ECU, and unplugging or removing the valve will result in a check engine light...

Forge Motorsport recirculation valve for the Fiat 500 Abarth T-Jet made from billet aluminium. This recirculation valve replaces the standard electronic valve. This offers improved throttle response and clamping load to maintain boost pressure more reliably and eliminates the chance of common diaphragm failure....

A recirculation valve for the Fiat Grande Punto 1.4 T-Jet, Abarth and Abarth Essesse and Alfa Romeo Mito fitted with the T-Jet engine ONLY.The valve itself is of piston design for longevity with the ability to be tuned with replacement springs if required.If you...

Atmospheric blow off valve for the Fiat Grande Punto 1.4 T-Jet, Abarth and Abarth Esseesse and Alfa Romeo Mito fitted with the T-Jet engine.The valve itself is of dual piston design for longevity with the ability to be tuned with replacement springs if required....

The Multiple Award-winning Kompact EM Series of Upgraded Diverter Valves are the world’s first truly plug and play Upgrade solution for your factory diverter valve. Simply unplug and unbolt your OEM Valve, and install a Kompact EM Valve in its place. No adaptors, hoses...

The Multiple Award-winning Kompact EM Series of Upgraded Diverter Valves are the world’s first truly plug and play Upgrade solution for your factory diverter valve. Simply unplug and unbolt your OEM Valve, and install a Kompact EM Valve in its place. No adaptors, hoses...

SKU: TMC1502 THIS IS NOT GENUINE ABARTH. THIS IS A REPLACEMENT OIL FILLER CAP WITH SCORPION LOGO. PLEASE NOTE YOU MUST REUSE YOUR EXISTING RUBBER SEAL FROM YOUR OLD OIL FILLER CAP. THIS WILL FIT NOT THE USA CAR. PLEASE NOTE DUE TO THE...

Boost, MAP and CAM sensor connectionsThe additional connection to the CAM sensor allows us to read RMP accurately. This enables us to safely apply further levels of tune, providing awesome performance gains whilst working safely within engine tolerances and maintaining air to fuel ratio....

THIS IS A BRAND NEW & BOXED, ABARTH BMC AIR FILTER AS FITTED TO THE 500 ABARTH WITH THE ESSEESSE KIT FITTED. THIS IS A DIRECT REPLACEMENT OF THE 500 ABARTH'S ORIGINAL AIR FILTER. THE PANEL / CYLINDRICAL AIR FILTER IS COMMONLY REFERRED TO...

A Silicone Intake hose for the Fiat 500 Abarth based on the standard Abarth hardipe , but with the size and flow maximised for improved performance. Please note: this will NOT fit the 2012-on Abarth Multiair engine. THIS IS FOR THE IHI TURBO ONLY....

A Lamin-x custom cut kit for your Fiat Abarth Punto (05-18) is designed to give your car a one-of-a-kind combination of style and protection on its headlights. Our film is designed to be installed on your Fiat with minimal trimming.  Our light kits are...

Please read the following notes carefully to ensure you select the correct actuator for your turbo.Fiat 500 T-Jet, Fiat Grande Punto T-Jet (including Abarth versions), Abarth T-Jet, and Alfa Mito T-Jet have the IHI turbo fitted as standard. Please select the product code IHI...

A turbo actuator for the Fiat Punto Evo, Fiat 124 Spider, Fiat 500 and Jeep Renegade (Multi Air Engine ONLY) This actuator fits directly to the turbocharger casting. Therefore no additional brackets is required.Forge Motorsport were one of the first company’s in the world...

This Forge Motorsport silicone inlet hose (aka Primary Induction Hose) is for the Ford Fiesta 1.0 Ecoboost.Not just a visual improvement to the engine bay but features a smooth internal bore offering less restriction than the OEM part. This hose is available in red,...