8 Pieces of Ø12 mm to Ø 10 mm reduction rings included in kit. SBMO kit enables you to create a Stabiliser-droplink in the required length. 3 rod lengths are included in each kit which creates the following options : L1 tube: 140 – 190MM / L2: 210- 270MM / L3: 280 – 330MM long droplinks.
V-Maxx Adjustable Drop Links (SBMO)
- Ø12 mm to Ø 10 mm reduction rings are used on a stabiliser or stabiliser bracket to reduce the Ø12 mm bracket hole to Ø10 mm so the SBMO fits perfectly. If stabiliser or stabiliser bracket have Ø 10 mm fixing hole do not install these rings.
- 1 reduction ring is used on a stabiliser or stabiliser bracket, if the stabiliser or stabiliser bracket has a thickness up to 6 mm.
- If the stabiliser or stabiliser bracket has a thickness of 6 mm or more 2 reduction rings are required.
- The length of the SBMO Stabiliser-droplink can be set to required length by turning the middle tube. Please secure by tightening the locking screws. NOTE : a minimum of 15mm thread overlap between tube and ball-joint thread is needed to ensure maximum tensile strength of SBMO- Lowering without droplinks when required, or more than the listed measurements will void the warranty and is done at own risk.
- In some cases, wheel spacers may be required and must be used
- Always align the car after replacing suspension parts.
- Sometimes actual lowering may be different from allowed by TUV regulations
- Vehicles with lowered factory suspension may lower less than the figures listed
- Kits are designed for fitting by an experienced professional. DIY fitting is at own risk.