Abarth

Disc Type: PlainSolid or Vented: SolidBolt Holes: 4Disc Diameter (mm): 264Disc Height (mm): 41Disc Thickness (new) (mm): 10Disc Thickness (min) (mm): 8

Disc Type: GrovedSolid or Vented: SolidBolt Holes: 4Disc Diameter (mm): 264Disc Height (mm): 41Disc Thickness (new) (mm): 10Disc Thickness (min) (mm): 8

Disc Type: SlottedBolt Holes: 4Disc Diameter (mm): 264Disc Height (mm): 41Disc Thickness (new) (mm): 10Disc Thickness (min) (mm): 8

Please note that this does not fit left hand drive vehicles This polished aluminium intake completely replaces the restrictive stock airbox, and filters the air with a Forge cone filter which gives an excellent induction noise. It comes with a heat shield integrated into...

Fits : FIAT Grande Punto ABARTH 2007-2010COMPLETE SET CONTAINS:-> Splitter/Front Bumper Lip Spoiler-> Mounting Kit-> Mounting ManualPlease note, the majority of our products are made from ABS plastic, the flexibility of these products provides them the ability to withstand some pressure. We highly recommend...

Fits only: FIAT Grande Punto ABARTH 2007-2010COMPLETE SET CONTAINS:-> Splitter/Front Bumper Lip Spoiler-> Mounting Kit-> Mounting ManualFitting manual: https://www.maxtondesign.co.uk/pdf/splitter_fitting-manual-maxton.pdfPlease note, the majority of our products are made from ABS plastic, the flexibility of these products provides them the ability to withstand some pressure.We highly...

Fits only: FIAT Grande Punto ABARTH 2007-2010COMPLETE SET CONTAINS:-> Splitter/Front Bumper Lip Spoiler-> Mounting Kit-> Mounting ManualFitting manual: https://www.maxtondesign.co.uk/pdf/splitter_fitting-manual-maxton.pdfPlease note, the majority of our products are made from ABS plastic, the flexibility of these products provides them the ability to withstand some pressure.We highly...

Fits only: FIAT Grande Punto ABARTH 2007-2010COMPLETE SET CONTAINS:-> Splitter/Front Bumper Lip Spoiler-> Mounting Kit-> Mounting ManualFitting manual: https://www.maxtondesign.co.uk/pdf/splitter_fitting-manual-maxton.pdfPlease note, the majority of our products are made from ABS plastic, the flexibility of these products provides them the ability to withstand some pressure.We highly...

Fits only: FIAT Grande Punto ABARTH 2007-2010COMPLETE SET CONTAINS:-> Splitter/Front Bumper Lip Spoiler-> Mounting Kit-> Mounting ManualFitting manual: https://www.maxtondesign.co.uk/pdf/splitter_fitting-manual-maxton.pdfPlease note, the majority of our products are made from ABS plastic, the flexibility of these products provides them the ability to withstand some pressure.We highly...

SKU: TMCAGP1Here we have our latest own branded TMC Motorsport Pop Off Hose Silicone Hose Kit for Abarth Grande Punto/Alfa Romeo Mito - Giulietta 1.4 TB. Please note these will only fit cars with a Front Mounted Intercooler. Increased heat resistance due the reinforced...

This kit allows a precise movement of the wheel and garantee the maintaining the characteristic angles defined during the static set up of the vehicle. All this results is a very precise steering, improve traction and lateral acceleration. The wishbones kit will allows caster...

This suspension arms kit intended for track day, road and racing applications, has been designed to improve the stiffness and strength of the arms, to decrease weight of the masses on the ground and to eliminate unwanted movement of the wheels, caused by the...

Designed to reduce suspension arms movement by stiffening the sub frame they are connected with. This added stiffness will improve the handling, steering response and suspension precision.The kit is made of anticorodal aluminium anodized red with retractable screws and discharged centrally.N.B. Available only for...

The standard torsion bar is very soft. This will limiting the performance during a curve. This kit allows to increase the rigidity of the system making the attitude of the vehicle much more "flat" and much more responsive to changes of direction.The torsion bar...

On most cars the rear camber angle is fixed as standard and cannot be modified. This kit, composed by two plates, will rise the camber value to an extra 1.5° that will get the best wheel contact to the ground. This will improve the...

The standard rear suspension has a very low torsional stiffness. This causes the understeer of the vehicle, thus limiting the performance. This kit allows to increase the rigidity of the system making the attitude of the vehicle much more "flat" and much more responsive...

The rear axle on stock cars, is mounted to the body via silentblocks. These elements allow a movement that generates imprecision of the rear train, in particular in braking and insertion curve. This phenomenon is very detrimental in sport driving and, in addition to...

Designed to improve chassis rigidity by tying the two strut towers together , it transmits the load of each strut tower during cornering, tying the two towers together and reducing chassis deformation. The results are a better handling, a more precise steering system and...

Designed to improve chassis rigidity by tying the two strut towers together and with the main chassis, it transmits the load of each strut tower during cornering, tying the two towers together and reducing chassis deformation. The results are a better handling, a more...

The top mount is interposed between the bumper and the dome of the body. In order to improve steering precision and the structural strength of the system, in particular in case of rigid structure, it is recommended to replace this one with a particular...